High Voltage Power Supply for X-ray
Discover the right high power voltage supply solution for your X-ray system
High voltage power supplies are the backbone of X-ray systems, providing the energy needed to generate X-rays through precise control of tube voltage and current. These supplies are used in multiple parts of the system - including the X-ray tube, control electronics, and beam shaping components - where they ensure consistent output and safe operation. By offering high-speed switching, low ripple, excellent voltage stability, and minimal low-frequency noise, they enhance image clarity, resolution, and diagnostic accuracy.
HW series
- 1kV, 2.5kV, 5kV, 10kV, 20kV, 30kV, 40kV & 50kV
- High frequency switch mode control
- Internal control or externally programmable
- Short circuit and flashover proof
- 24 hour burn in
- Safety assessed to EN61010-1
The HW series of high voltage modules covers the range from 1kV to 50kV giving 100Watts of output power. Control of the output voltage is by internal potentiometer or by external potentiometer or by an external 10 volt analogue control voltage. Pins 1 to 10 of the 12 pin Molex input connector are pin compatible with both the high precision HP series and the general purpose KS series. All units are short circuit proof and use high frequency switching techniques, in conjunction with a ferrite step-up transformer to control the output. The units operate from a 24V input and have an efficiency of around 80%.
Did not find what you need?